Send us a text

Text with us!

By submitting this form, you agree to our Terms of Service & Privacy Policy.

Three red tanks set in an open excavation with a crane behind them

Backup power fuel systems, compliance and environmental

Data Center Fuel Systems in NY, NJ, CT and PA

A data center is only as reliable as the diesel behind its generators. American Petroleum Equipment & Construction Company (APECCO) installs, monitors, tests and maintains standby generator fuel systems, and handles the tank removal and environmental work that comes with building on older sites.

  • Licensed, bonded and insured
  • Built to NFPA 30, 37 and 110
  • OSHA-trained crews

Who we work for

Built for operators and facility managers

When the grid drops, the generators have to start and keep running. That depends on a fuel system that is clean, monitored, tested and documented.

APECCO works with data center operators and facility managers who need that system installed correctly and kept ready. We cover the six areas below, across New York, New Jersey, Connecticut and Pennsylvania: fuel storage, monitoring, testing, fuel quality, maintenance and site work.

Our team is certified and OSHA-trained, and the company is fully licensed, bonded and insured. Fuel system installation falls under our Construction division and tank closures and spills under Environmental services.

APECCO Environmental Services box truck with a list of services on the door

From tank to generator

Fuel storage, monitoring and testing

The first three service areas cover the system itself: what holds the fuel, what watches it and what proves it is sound.

01

Generator fuel storage

Standby generators run on whatever fuel is stored on site, so the tanks, piping and controls around them are part of the power system. APECCO installs the fuel storage side of that system, from the bulk tank to the generator.

Bulk storage is available aboveground or underground, in double wall diesel tanks built to UL 142 or UL 2085. We tie in day tanks and sub-base tanks, set transfer pumps and run the fuel piping. Spill containment and overfill protection go in with the tank, and our in-house electrical crew handles the wiring for pumps and controls, so one contractor covers the fuel system end to end.

  • Bulk aboveground and underground diesel tanks
  • Double wall, UL 142 and UL 2085
  • Day tanks and sub-base tank tie-ins
  • Transfer pumps and fuel piping
  • Spill containment and overfill protection
  • In-house electrical for pumps and controls
02

Monitoring and leak detection

A tank you cannot see into needs instruments that tell you what is happening. We install and service tank gauging and leak detection, so a fuel system reports its own condition before a small problem becomes a failed test or a spill.

That means Veeder-Root TLS-350 and TLS-450 and Omntec tank gauging, plus interstitial, sump and line leak detection wired to alarm outputs that your facility team can act on. The annual tank monitor certification keeps the system documented as working.

  • Veeder-Root TLS-350 and TLS-450
  • Omntec tank gauging
  • Interstitial, sump and line leak detection
  • Alarm outputs
  • Annual tank monitor certification
03

Testing and compliance

Fuel systems that serve critical loads are inspected and regulated, and the paperwork has to be there when someone asks for it. APECCO tests the system and keeps the records that show it passed.

Testing covers tank and line tightness, leak detection and cathodic protection. We provide tank registration support with NYSDEC PBS, NJDEP and CT DEEP. The inspection records we produce support EPA SPCC and NFPA 30 and 110 programs, which gives a facility manager one file to point to.

  • Tank and line tightness testing
  • Leak detection testing
  • Cathodic protection testing
  • Registration support: NYSDEC PBS, NJDEP, CT DEEP
  • Records for EPA SPCC and NFPA 30 / 110 programs

Keeping it ready

Fuel quality, maintenance and site work

The last three service areas keep the system dependable over time and clear the way when a project starts on older ground.

04

Fuel quality and tank care

Diesel that sits for long periods collects water and sediment, and a generator is only as dependable as the fuel it draws. Keeping the tank clean is part of keeping the system ready.

We remove water and sediment by vacuum truck. Tank cleaning is non-entry, so no one goes into a confined space to do it. When a tank needs service, repair or replacement, we handle the product transfer so the work can proceed.

  • Water and sediment removal by vacuum truck
  • Non-entry tank cleaning
  • No confined-space entry
  • Product transfer during service, repair or replacement
05

Preventive maintenance

The cheapest outage is the one that never happens. A scheduled inspection program catches worn hardware and small leaks while they are still routine work.

Programs run monthly, quarterly, semi-annual or annual, depending on what the site needs. Each visit covers sumps, fill ports and vents, with filters and hardware replaced as needed. If something fails between visits, our emergency service answers 24/7 at (845) 778-5110.

  • Monthly, quarterly, semi-annual and annual programs
  • Sump, fill-port and vent inspections
  • Filter and hardware replacement
  • 24/7 emergency service
06

Site development and environmental

Data centers are often built on older industrial, commercial or fuel-handling land, and a buried tank found during site work can stop a schedule. APECCO handles that part of the project as well.

We remove and close legacy tanks on redevelopment sites and prepare the tank and spill closure reports that go to state regulators. If contamination is found, we provide remediation and oil/water separators, and spill response is available 24/7.

  • Removal and closure of legacy tanks
  • Closure reports to state regulators
  • Remediation
  • Oil/water separators
  • 24/7 spill response

Questions

Data center fuel system FAQ

Can APECCO handle both the generator fuel system and the work around it?

Yes. APECCO installs, monitors, tests and maintains standby generator fuel systems, and it also does the tank removal and environmental work that comes with building on older sites. Our in-house electrical crew covers pump and control wiring.

Do you work above and below ground?

Yes. We install bulk aboveground and underground diesel tanks, double wall and built to UL 142 or UL 2085, along with day tanks, sub-base tank tie-ins, transfer pumps and fuel piping.

Can you help with tank registration and inspection records?

We provide tank registration support for NYSDEC PBS, NJDEP and CT DEEP. Our inspection records support EPA SPCC and NFPA 30 and 110 programs.

What if we have a fuel or spill emergency?

Call our 24/7 emergency line at (845) 778-5110. APECCO provides 24/7 spill response and emergency service.

APECCO van beside an open tank manway with traffic cones set out

Next step

Planning or maintaining a generator fuel system?

Tell us about the site and what you need. APECCO will follow up with next steps.

24/7 Emergency Line: (845) 778-5110